DOM Carbon Steel Tube: 1.375" OD x .125" wall x 36"

Description

Untitled Document
PRODUCT IMAGE
DOM Carbon Steel Tube: 1.375" OD x .125" wall x 36"
DESCRIPTION
We have the capability to cut your order to your specs upon request.  If you would like this item cut, please note it as such in your order.
We stock this item in Random Lengths at or around 20'.  If you would like to order a size that you are unable to find in our eBay store, please contact us and we will do our best to accomodate you.  If you would like to buy in larger volume, please let us know, as we deal with freight carriers on a regular basis and can offer very affordable freight costs.
The images displayed for this product may not reflect the actual item for sale.  The image is simply a general representation of the product and will most likely differ dimensionally from the item that is to be sold.
Product Description:
DOM is actually not a type of tubing, but a process that is applied to tubing after it is initially constructed. It is
Drawn Over a Mandrel
...which "cold works" it, giving it more exact dimensions relative to the inside and outside diameters, a smoother finish, and better allignment of the crystal latice structure. Although it is almost always referred to as a
SEAMLESS
tube, technically it is NOT seamless tubing, and it started life as some sort of EW (electric welded) tubing.  During the manufacturing process, the weld line becomes nearly undetectable, thus it is referred to as
SEAMLESS
. It is considered a high quality tube, and is normally constructed from SAE 1020 or 1026 steel.
1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. DOM is formed from strip and electric-resistance welded, then cold drawn to size. The cold drawing process causes the weld line to virtually disappear.
Tensile strength (ksi) 80
1026 grade is normally used in the manufacturing of DOM
over 2" OD, with walls heavier than .156". Tensile Strength (ksi) 87
Depending on the diameter and/or the wall thickness you may receive EITHER 1020 or 1026.
Stock Car Steel & Aluminum is a distributor of many types of metals and alloys.  We have been a distributor to the NASCAR racing industry in Mooresville, NC for more than a decade.  Please let us know if we can help you with any of your supply needs.
Carbon Steel HR & CR
Tubing
DOM & ERW Round Tube
1/4" OD to 3-1/2" OD (all walls)
Roll Bar Tube - CD Seamless & DOM
1-3/4" OD x .095" min wall - CD Seamless
1-3/4" OD x .090" min wall - DOM
1-3/4" OD x .090" min wall - CD Seamless, Turned, Ground, & Polished
Sheet
CR 1008 Sheets
10Ga to 30 Ga
AKDQ English Wheel Sheets
24Ga (.025) x 48" x 96"
24Ga (.025) x 48" x 120"
22Ga (.030) x 48" x 120"
Bar Stock
Round, Square, Flat
Plate
All Grades
Full or Partial Plates
Precision Ground Surface Plates
10Ga to 30 Ga
Structurals
Angle, Channel, I-Beam
Plastic
Lexan Sheets - Regular, MR10
Black ABS, HMW, HDPE Sheets (skirting)
Delrin Round Bar
Tungsten Blocks
Chassis Weights
Aluminum
2024, 3003, 6061, 5052, 7075 (All Tempers)
Tubing
Round Tube (1/4" OD to 3-1/2 OD all walls) Rectangle Tube
Sheet
All Grades / All Tempers (.025" to .125")
Painted Aluminum Sheets (All colors)
.040" x 48" x 120"
All sheets vinyl protected on one side
Bar Stock
Round, Square, Flat
Plate
All Grades
Full or Partial Plates
Structurals
Angle, Channel, I-Beam
Chrome Moly
4130 Normalized
Tubing
Round Tube (3/16" OD to 1-3/4 OD all walls) Rectangle Tube
Sheet, Bar, Plate
Stainless Steel
All Grades
Tubing, Sheet, Bar, Plate
Mallory Metal
Crankshaft Balances
Surface Plates
Specialty Orders