5 Gallon Stainless Steel Vacuum Chamber with 7CFM Pump

Description

Company Information
Products
Order Information
FAQ
Contact Us
Store Categories
Store Categories
Glass Reactor
Rotary Evaporator
2L
5L
10L
20L
50L
Accessories
Short Path
Short Path Kit
Parts & Accessories
Vacuum Chamber Kits
Aluminum Chambers
Stainless Steel Chambers
Vacuum Chamber with Pumps
VC20S Kits (1.6 Gallon)
VC20S10 Kits (0.8 Gallon)
VC24A Kits (2.9 Gallon)
VC25S Kits (3.2 Gallon)
VC30S Kits (5.5 Gallon)
VC30S45 Kits (8.4 Gallon)
Vacuum Pump
Rotary Vane Pumps
Water-jet Aspirators
Molecular Distillation
Vacuum Drying Oven
Chiller /Heater
Vacuum Filter
Other
Photo Gallery
Product Description
This listing is for a 5.0gallon (21Liter, 30cm diameter x 30 cm depth chamber) LAB1ST brand vacuum chamber, with a 3CFM 110V single stage vacuum pump.
This is a upgraded vacuum pump ,it comes with a oil/mist filter to prevent the oil vapor from escaping into your working space.(See Image)
It's in stock and ready to ship from our warehouse in California.
Read before placing order:
Precaution for wood turning: Stabilizing resin (such as Cactus Juice) can be highly corrosive to the lid of vacuum chamber, thus wood turning is not allowed in this chamber.
For customers in US lower 48 states, we ship the vacuum pumps with oil in the bottle.For non-US customers, we may ship this kit from our warehouse in Shanghai. For these orders, we will ship the pump without pump oil, which is strictly prohibited by International air freight. You will need about 250ml #100 viscosity grade vacuum pump oil.
We also offer 220V 2.5 CFM vacuum pump,pls leave a message or contact us directly if customers need it .
Product Features of Vacuum Chamber:
Stainless steel chamber with welded handles for long-term air-tightness performance.(typical through-hole handles might lead to leakage after long-term operation.
Our chamber has a rounded edge on the top,for the protection of silicone gasket.
Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.
Gauge reading in both inHg and Mpa.
All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg @ 24 hours)
Two-sided flippable vacuum gasket for better durability and reliability.
The gasket is chemically resistant to butane and other solvents.
2/3" thickness, Acrylic lid,more resistant than p
olycarbonate lid
Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.
50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.
Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.
45 day complimentary warranty and life-long parts support.
All questions will be answered in 12 hours.
Product Specs & Part List of the Chamber:
Vacuum Chamber:
stainless steel, 30 x 30cm (11.8 x 11.8"), with welded handles, 5.0 Gallon.
Lid:
2/3" thickness, Acrylic.
Vacuum Gasket:
silicone, resistant to Butane and other solvents.
Vacuum Gauge Assembly:
0.5 inHg accuracy.
Valve Assembly:
very high quality air-tight brass valves, with 50um filter on vent port.
Vacuum Hose:
3.3' / 1 meter food grade collapse-proof silicone hose, 3 mm wall thickness (8 mm I.D, 14 mm O.D).
Vacuum Pump Adapter:
3/8“ hose barb to 1/4 SAE flare port.
Accessories:
1 x PTFE tape, 2 x screw nuts, 2 x washers, 2 x wrench, 2 x Viton O-rings.
Volume:
21Liter / 5.0 Gallon.
Net Weight:
4.5 kg / 9.9 lb.
Dimension (W x D x H):
43 x 30x 43cm (16.9x 11.8 x 16.9")
Product Features of Vacuum Pump:
It comes with an oil/mist filter on the top to prevent the oil vapor from escaping into your working space.
3 CFM Single-Stage Rotary Vane Vacuum Pump, which is light-weight and handy
High efficiency and low noise.
Heavy duty aluminum alloy casting.
Direct drive motor allowing easy starting and is maintenance free.
Oil sight glass for easy monitoring of oil levels.
Internal high volume cooling fan for extended life span.
Non slip cushion handle.
45 day complimentary warranty
Product Specs of Vacuum Pump:
Model:
RS-1-110
Rated voltage:
110V
P
umping rate:
3 CFM
Ultimate pressure:
5 Pa
Motor power:
150 W
Oil capacity:
220 mL
Dimensions:
260 x 110 x 240 mm
Weight:
5.8 KG
Inlet connection thread:
7/16"-20UNF (1/4" SAE Flare)
Order Information
Contact Us
Payment
Shipping
Returns
Warranty
Contact Us
Please feel free to contact us via eBay message or email, and we will reply ASAP within 12 hours.
Payment
We accept payments in Paypal, credit card or bank transfer.
Please contact us if you need our W-9 information.
Shipping
We ship worldwide. The shipping cost here is correct for customers in US only. Customers in all other countries please contact us for quote on shipping.
We ship via DHL or UPS from our warehouse in Shanghai. Please provide your phone number for successful delivery.
We are able to ship most of our standard products within 5 business days. Please contact us about lead time for customization.
If your package has clearly visible damages during shipment, please take photos for both the packaging and damaged product, have the driver document all damages, and contact us as soon as possible. We will file a claim with the shipping company. Please contact us within 7 days if any internal damages or malfunctions are found while you open the package and operate the product, we will send replacement for the damaged items.
If a package is not deliverable and returned to us, we will charge a restocking fee (typically 20% value). Please make sure you leave the correct shipping address, and pay attention to eBay messages after placing order. Tracking numbers will be uploaded right after shipment.
Returns
We have our money back guarantee on all our products.
The products can be shipped back to our warehouse in California or Shanghai.
Please return the product within 14 days in the original packaging and unused condition. This includes all accessories, user manuals, original packing, etc. For non-defective items returned, the buyer will be responsible for the initial and return shipping. Please make sure you contact us for detailed instructions before you sent it back, otherwise the package will be refused.
We do not accpet the return of customized products.
Warranty
Unless otherwise specified, our products are covered by a 1-year warranty from the date of purchase. We will replace any failed components at no charge to the customers for parts or shipping.
Note: Consumable components (like glassware,gaskets or vacuum seals) are not covered in the 1-year warranty.
Copyright ©  Labfirst Scientific Instruments Co., Ltd. All rights reserved.
Company Information
Products
Order Information
FAQ
Contact Us
Store Categories
Store Categories
Glass Reactor
Rotary Evaporator
2L
5L
10L
20L
50L
Accessories
Short Path
Short Path Kit
Parts & Accessories
Vacuum Chamber Kits
Aluminum Chambers
Stainless Steel Chambers
Vacuum Chamber with Pumps
VC20S Kits (1.6 Gallon)
VC20S10 Kits (0.8 Gallon)
VC24A Kits (2.9 Gallon)
VC25S Kits (3.2 Gallon)
VC30S Kits (5.5 Gallon)
VC30S45 Kits (8.4 Gallon)
Vacuum Pump
Rotary Vane Pumps
Water-jet Aspirators
Molecular Distillation
Vacuum Drying Oven
Chiller /Heater
Vacuum Filter
Other
Photo Gallery
Product Description
This listing is for a 5.0gallon (21Liter, 30cm diameter x 30 cm depth chamber) LAB1ST brand vacuum chamber, with a 7CFM 110V single stage vacuum pump.
This is a upgraded vacuum pump ,it comes with a oil/mist filter to prevent the oil vapor from escaping into your working space.(See Image)
It's in stock and ready to ship from our warehouse in California.
Read before placing order:
Precaution for wood turning: Stabilizing resin (such as Cactus Juice) can be highly corrosive to the lid of vacuum chamber, thus wood turning is not allowed in this chamber.
For customers in US lower 48 states, we ship the vacuum pumps with oil in the bottle.For non-US customers, we may ship this kit from our warehouse in Shanghai. For these orders, we will ship the pump without pump oil, which is strictly prohibited by International air freight. You will need about 250ml #100 viscosity grade vacuum pump oil.
We also offer 220V 2.5 CFM vacuum pump,pls leave a message or contact us directly if customers need it .
Product Features of Vacuum Chamber:
Stainless steel chamber with welded handles for long-term air-tightness performance.(typical through-hole handles might lead to leakage after long-term operation.
Our chamber has a rounded edge on the top,for the protection of silicone gasket.
Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.
Gauge reading in both inHg and Mpa.
All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg @ 24 hours)
Two-sided flippable vacuum gasket for better durability and reliability.
The gasket is chemically resistant to butane and other solvents.
2/3" thickness, Acrylic lid,more resistant than p
olycarbonate lid
Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.
50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.
Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.
45 day complimentary warranty and life-long parts support.
All questions will be answered in 12 hours.
Product Specs & Part List of the Chamber:
Vacuum Chamber:
stainless steel, 30 x 30cm (11.8 x 11.8"), with welded handles, 5.0 Gallon.
Lid:
2/3" thickness, Acrylic.
Vacuum Gasket:
silicone, resistant to Butane and other solvents.
Vacuum Gauge Assembly:
0.5 inHg accuracy.
Valve Assembly:
very high quality air-tight brass valves, with 50um filter on vent port.
Vacuum Hose:
3.3' / 1 meter food grade collapse-proof silicone hose, 3 mm wall thickness (8 mm I.D, 14 mm O.D).
Vacuum Pump Adapter:
3/8“ hose barb to 1/4 SAE flare port.
Accessories:
1 x PTFE tape, 2 x screw nuts, 2 x washers, 2 x wrench, 2 x Viton O-rings.
Volume:
21Liter / 5.0 Gallon.
Net Weight:
4.5 kg / 9.9 lb.
Dimension (W x D x H):
43 x 30x 43cm (16.9x 11.8 x 16.9")
Product Features of Vacuum Pump:
It comes with an oil/mist filter on the top to prevent the oil vapor from escaping into your working space.
3 CFM Single-Stage Rotary Vane Vacuum Pump, which is light-weight and handy
High efficiency and low noise.
Heavy duty aluminum alloy casting.
Direct drive motor allowing easy starting and is maintenance free.
Oil sight glass for easy monitoring of oil levels.
Internal high volume cooling fan for extended life span.
Non slip cushion handle.
45 day complimentary warranty
Product Specs of Vacuum Pump:
Model:
RS-3-110
Rated voltage:
110V
P
umping rate:
7 CFM
Order Information
Contact Us
Payment
Shipping
Returns
Warranty
Contact Us
Please feel free to contact us via eBay message or email, and we will reply ASAP within 12 hours.
Payment
We accept payments in Paypal, credit card or bank transfer.
Please contact us if you need our W-9 information.
Shipping
We ship worldwide. The shipping cost here is correct for customers in US only. Customers in all other countries please contact us for quote on shipping.
We ship via DHL or UPS from our warehouse in Shanghai. Please provide your phone number for successful delivery.
We are able to ship most of our standard products within 5 business days. Please contact us about lead time for customization.
If your package has clearly visible damages during shipment, please take photos for both the packaging and damaged product, have the driver document all damages, and contact us as soon as possible. We will file a claim with the shipping company. Please contact us within 7 days if any internal damages or malfunctions are found while you open the package and operate the product, we will send replacement for the damaged items.
If a package is not deliverable and returned to us, we will charge a restocking fee (typically 20% value). Please make sure you leave the correct shipping address, and pay attention to eBay messages after placing order. Tracking numbers will be uploaded right after shipment.
Returns
We have our money back guarantee on all our products.
The products can be shipped back to our warehouse in California or Shanghai.
Please return the product within 14 days in the original packaging and unused condition. This includes all accessories, user manuals, original packing, etc. For non-defective items returned, the buyer will be responsible for the initial and return shipping. Please make sure you contact us for detailed instructions before you sent it back, otherwise the package will be refused.
We do not accpet the return of customized products.
Warranty
Unless otherwise specified, our products are covered by a 1-year warranty from the date of purchase. We will replace any failed components at no charge to the customers for parts or shipping.
Note: Consumable components (like glassware,gaskets or vacuum seals) are not covered in the 1-year warranty.
Copyright ©  Labfirst Scientific Instruments Co., Ltd. All rights reserved.
On Apr-07-21 at 01:20:32 PDT, seller added the following information: